How To Replace Aluminum Screen On Window

Replacing an aluminum screen is an easy task. Screening comes in metal or fiberglass. Whichever you use, replacing an aluminum screen on a screen door is a useful skill to accept and ane yous're likely to need several times over the years to come — particularly if you have kids or pets.

Get your replacement screen at a dwelling center or hardware store. Be sure to choose a screen that is a few inches longer and wider than your screen opening. For this project you'll also need a splining roller, a work surface, a pair of pliers (or an awl). If your replacement screen is larger than necessary, you'll demand a pair of scissors strong enough to cut through the material y'all purchased.

Remove the frame and lay it flat on a work surface.

Remove the screen in its frame from the door and lay it flat on a workbench or a set of sawhorses.

Pry the spline out of the groove on the back of the frame.

Use modest pliers or a carpenter's awl to pry the spline out of the groove. If the corners are tight, utilize a screwdriver to remove the spline. If the spline appears to be in good shape, set it aside for use with the new screen.

If the spline is breakable or cracked, you lot must replace it with a new spline (bachelor at hardware stores).

Lift out the damaged screen.

Holey screens let in insects — and bats, if the pigsty is large plenty.

Wipe the spline groove clean.

Exist sure that yous remove even the tiniest grit. Y'all tin use the tip of a screwdriver or awl to get into the groove if necessary.

Lay the new aluminum screen over the frame.

Be sure that it overlaps the groove by at least 1/8 inch on all four sides.

Cutting the screen at a 45-degree bending at the corners.

Cutting off the corners of the screen at a 45-degree angle, just within the outer border of the spline groove.

Printing the screen into the groove using the convex end of the splining roller.

Agree the roller at a 45-caste angle toward the inside border of the groove and then curl downward to press the screen into the groove.

Concur the screen taut across the frame as y'all whorl it into place. Sags and wrinkles are about as attractive on screen doors equally they are on people.

Press the spline into the groove using the concave end of the roller.

Tip: Don't cut the spline at the corners: Instead, bend the spline effectually the corners and install it in one continuous piece. When you lot position it tightly in the groove, the spline holds the screen in identify.

Trim away excess screen.

Place the tip of the knife between the spline and the outside edge of the spline groove and pull the knife slowly along the unabridged groove perimeter.

About This Article

This article is from the book:

• Dwelling house Maintenance For Dummies ,

Most the book authors:

James Carey is a nationally-recognized expert on habitation building and renovation with over threescore years of experience as an award-winning, licensed contractor. Carey reaches millions of people nationwide through a weekly radio program and syndicated newspaper cavalcade titled On The House. His website onthehouse.com consists of over thirteen,000 pages of abode comeback tips and information. Morris Carey is a nationally-recognized skillful on habitation edifice and renovation with over 60 years of experience as an award-winning, licensed contractor. Carey reaches millions of people nationwide through a weekly radio plan and syndicated paper column titled On The Business firm. His website onthehouse.com consists of over 13,000 pages of dwelling comeback tips and information.

This article tin be constitute in the category:

• Doors ,

Source: https://www.dummies.com/article/home-auto-hobbies/home-improvement-appliances/doors/how-to-replace-an-aluminum-screen-on-a-screen-door-206807

Posted by: kistlercaude1987.blogspot.com

Share this post